OctoTariffs

Meters and readings

Octopus VWAN smart meters: using broadband for readings

What Octopus’s VWAN trial is, who can get it, how the device works with your Wi-Fi, and what to do now if your smart meter has no signal.

Edited by Rob Gibbs. Published: . Guidance reviewed: .

Methodology · Corrections

Short answer

VWAN (Virtual WAN) is an Octopus trial that lets a smart meter send its readings over your home broadband instead of the mobile-based smart meter network. When we checked, it was being rolled out in small batches, only to homes with little or no 4G signal, stable Wi-Fi at the meter and very patchy readings, and only to people on Octopus’s waitlist. An engineer fits a small device within 5 metres of the meter, and the trial is free. If you are not on it, a meter with no signal still works: send monthly readings and ask Octopus about other fixes.

Why some smart meters cannot reach Octopus

A smart meter uses two wireless networks. The home area network (HAN) links the meters, the in-home display and any Octopus Home Mini inside your home. The wide area network (WAN) carries readings to Octopus; it is run by the Data Communications Company (DCC), overseen by Ofgem, and works much like a mobile phone network.

Where mobile coverage is weak, or the meter sits in a signal dead spot such as a basement with thick walls, readings can stop reaching Octopus. Octopus says a meter in that state is very unlikely to be broken: it keeps measuring like an ordinary meter, but Octopus cannot read it remotely. The 2G network is due to be phased out by the end of 2033 and an upgraded 4G network will serve most homes, but some rural and hard-to-reach places have no usable 4G either.

What VWAN is

VWAN stands for Virtual WAN. Instead of going over the mobile-based network, the meter’s readings travel over your home broadband, through a small VWAN device (Octopus calls it a VWD) that talks to the meter wirelessly. It replaces only the link from the meter to Octopus, so your energy supply does not depend on it. Octopus says the same security rules apply as for every other smart meter, and the readings are encrypted.

Who can get VWAN: the current trial

When we checked in November 2026, VWAN was still a trial, rolled out in small batches across Great Britain. Octopus says it only suits homes with both no or very little 4G signal and a stable Wi-Fi connection that reaches the meter. On top of that:

  • Octopus is currently limiting places to customers whose smart meters give very intermittent readings.
  • It is only rolled out to people who joined the waitlist and received the device.
  • Taking part costs nothing.
  • If your meter keeps losing signal, ask Octopus whether you could be considered.

How the device is fitted and what it can see

An Octopus engineer fits the device, connects it to your Wi-Fi, pairs it with your smart meter and checks everything is talking before they leave. Octopus expects this to take about an hour. The device must stay within 5 metres of the meter.

Octopus says it cannot see your browsing history, your files or passwords, or which devices are on your Wi-Fi: the connection carries only your encrypted meter readings, and the amount of data is so small you will not notice it on your internet speed. If the Wi-Fi drops, your supply carries on and the meter stores readings until the connection returns. If you change your router or Wi-Fi password, enter the new details in the device’s Wi-Fi settings on its screen, or ask Octopus to help.

If your smart meter has no signal now

Until a fix is in place, treat the smart meter like an ordinary one and send Octopus a reading every month, so your bills are not estimates. When you report the problem, Octopus finds these details useful: the distance between your gas and electricity meters and anything in between, how the property is built, where the meters are, what surrounds the property (trees or hills, for example), photos showing the meters’ serial numbers, and anything that has changed near them, such as scaffolding or a new wall.

VWAN is not the only fix. Depending on the fault, Octopus also uses signal boosters (Alt-HAN) and dual-band communications hubs to strengthen the in-home network, can use a Home Mini as a bridge between meters, and is replacing older SMETS1 meters and communications hubs with 4G-ready ones at no extra cost.

Citizens Advice says that once you report a meter that is not working, the supplier must, within 5 working days, check the meter, try to find out why and offer to write to you with what it found, or pay you a set amount of compensation for each step it misses. It should give a date to fix the problem within 90 days and take all reasonable steps to do so. If you are not given a good reason why the meter cannot be made to work, complain, and go to the Energy Ombudsman if that fails.

Questions people ask

What does VWAN stand for?

Virtual WAN. The WAN, or wide area network, is the secure network a smart meter normally uses to send readings to your supplier. VWAN sends the same readings over your home broadband instead, through a small device paired with the meter.

Can anyone with an Octopus smart meter get VWAN?

Not when we checked in November 2026. It was a trial rolled out in small batches to homes with little or no 4G signal, stable Wi-Fi at the meter and very intermittent readings, and only to customers on Octopus’s waitlist. If your meter often fails to send readings, contact Octopus and ask whether you could be considered.

Does VWAN cost anything?

No. Octopus says taking part in the trial is free, and the device uses so little data that it will not slow your broadband.

What happens if my Wi-Fi goes down?

Your gas and electricity carry on as normal, because the supply does not depend on Wi-Fi or mobile signal. The meter stores its readings and sends them once the connection is back. If readings still are not getting through, check the device is plugged in, within 5 metres of the meter and has your current Wi-Fi details.

Can Octopus see what I do online through VWAN?

Octopus says no: it cannot see your browsing history, files, passwords or the devices on your network. The device only sends your encrypted meter readings, protected by the same security rules as every other smart meter.

Does my smart meter or in-home display normally need Wi-Fi?

No. Smart meters normally use the separate smart meter network, and the in-home display connects to the meter by its own low-power radio, not your Wi-Fi. VWAN is the exception for poor-signal homes, and an Octopus Home Mini, if you have one, does need Wi-Fi.

My smart meter has no signal and I am not on the trial. What should I do?

Report it to Octopus with photos of the meters and details of where they are, then send manual readings every month so your bills are not estimates. The meter still records your use. Octopus may be able to fix it another way, for example with a signal booster or a newer communications hub.

Primary sources

  • Meet VWAN: A smarter way to keep your smart meter connected — Octopus Energy; checked 2026-11-14. Published 24 July 2026, checked 14 November 2026: VWAN (Virtual WAN) lets a smart meter send readings over home broadband instead of the mobile-based smart meter network run by the DCC. It is being trialled in small batches across Great Britain, only for homes with little or no 4G signal and stable Wi-Fi at the meter, and currently for customers whose meters give very intermittent readings. An engineer fits a small VWAN device (VWD) in about an hour, connects it to Wi-Fi and pairs it with the meter; it must stay within 5 metres. Octopus cannot see browsing, files, passwords or connected devices; readings are encrypted. If Wi-Fi drops, supply is unaffected and the meter stores readings to send later. A new router or password needs entering on the device. The trial is free. The 2G network is due to be phased out by the end of 2033, with 4G replacing it for most homes.
  • Smart meter myth busters — Octopus Energy; checked 2026-11-14. Checked 14 November 2026: smart meters do not normally use your Wi-Fi; Octopus is trialling VWAN for meters in particularly bad WAN areas, and it is only rolled out to those who joined the waitlist and received the device. The in-home display connects by Zigbee, not Wi-Fi; a Home Mini needs Wi-Fi. A non-functioning smart meter works as a traditional meter, so you submit manual readings.
  • Understanding smart meter connectivity — Octopus Energy; checked 2026-11-14. Published 10 June 2026, checked 14 November 2026: smart meters use the WAN (run by the DCC, overseen by Ofgem) to reach the supplier and the HAN to reach the in-home display and the other meter. A meter without signal still works as a normal meter, so readings are needed; a non-communicating meter is very unlikely to be broken. Fixes include Alt-HAN boosters (waitlist), dual-band comms hubs, a Home Mini as a HAN bridge, SMETS1-to-SMETS2 upgrades and 4G comms hub replacements at no additional cost. Contact Octopus if readings are estimated or requested more than 14 days after installation, with meter distances, construction, locations, surroundings and photos of serial numbers.
  • If you’re having problems with your smart meter — Citizens Advice; checked 2026-11-14. Checked 14 November 2026 (England advice): “estimated” or “E” beside readings suggests the supplier is not getting automatic readings. Within 5 working days of contact the supplier must check the meter, try to find out why it is not working and offer to write with its findings, or pay fixed compensation for each unfinished step within 10 working days. It should give a date to resolve it within 90 days and take all reasonable steps to fix or replace the meter; it may cite a weak network signal. If the reason is not good enough, complain, then go to the Energy Ombudsman.