Prices and the price cap
How to test a "save £X" smart tariff claim against your own usage
What sits behind a smart or EV tariff savings figure, the four questions to ask of it, and how to check it against your own half-hourly readings.
Edited by Rob Gibbs. Published: . Guidance reviewed: .
Short answer
A savings figure on a tariff page is a worked example, not a quote. Its small print tells you what it was compared with, whose usage it assumed, how much of that use it put in the cheap hours, and when the prices were taken. If any of those differ from your home, so will your saving. The way to know is to price your own half-hourly readings, which our usage tools do in your browser.
What a savings figure really is
Suppliers work out a headline saving for one made-up home and print the assumptions in a footnote. The figure is accurate for that home. It is only a guide to yours.
The footnotes we read on 15 November 2026 show how it is done. E.ON Next’s Next Drive Smart saving assumes a car driving a set number of miles a year, all charged at the off-peak rate, compared with charging at the national-average standard variable rate. EDF compares GoElectric with its standard variable tariff on one split of peak and off-peak use. OVO’s Charge Anytime figure assumes a mileage on one of its monthly plans and compares it with its average standard rate plus public charging at an assumed price.
None of that is wrong, but each figure answers a question about a home that may not be yours.
Four questions to ask of any claim
Read the footnote and look for four things:
- Compared with what? A standard variable tariff at the price cap, your current tariff, or public charging give very different answers. A saving against the cap says little if you are already on a cheaper fix.
- Whose usage? Many claims use Ofgem’s typical consumption figures or a set annual mileage. A smaller home, a bigger car or a second EV changes the answer.
- How much lands in the cheap hours? This decides most smart-tariff savings. British Gas’s EV quote assumes 46% of use is off-peak; EDF says its EV customers average 43% and that at least 6% is needed for GoElectric to pay. Your own share may be well above or below.
- Car only, or the whole bill? Some figures count only the car’s charging. On a whole-home tariff the day rate is often higher than a standard tariff, and that cost sits outside a charging-only sum.
Agile and Tracker claims need a date
Claims about Agile Octopus and Octopus Tracker are harder still, because the price itself moves. Agile sets a price for every half hour from the wholesale market, with Octopus’s Price Cap Protect ceiling on the top, and Tracker sets one price each day. A saving measured over one winter or one summer tells you about that period’s wholesale prices, not next year’s.
So a dated claim is worth more than an undated one, and a claim for a whole year is worth more than one for a good month. Our Agile research report shows how prices have behaved across regions and seasons.
Test it on your own readings
You already have the best data for the job: your own smart meter readings.
- Download your half-hourly readings from your Octopus account, or let our tools read them with your API key. Your browser talks to Octopus directly and this site never sees your data.
- Use a full year if you can. Winter and summer use differ a lot, and a month can flatter a tariff.
- Our usage tool shows when you use power and what it would cost on a chosen Octopus tariff, half hour by half hour.
- Our compare-my-usage tool ranks Octopus’s published import tariffs on the same readings, standing charges included, so you can see whether Agile, Go, Intelligent Go or a fix would have been cheapest for you.
- If you plan to shift use, such as charging a car overnight, be honest about how much you really will. The tools price what you did, not what you hope to do.
When a claim is likely to hold for you
A headline saving is a fair guide when your home looks like the example: similar total use, a similar share in the cheap hours and the same starting tariff. It is a poor guide when you use most of your power at teatime and cannot move it, when you are already on a cheaper tariff than the one it compares with, or when the prices behind it are more than a few months old.
Questions people ask
Are smart tariff savings claims misleading?
Not usually. They are worked examples for one assumed home, with the assumptions in the footnote. They mislead only if you read them as a quote for your own home. Check what the figure was compared with, the usage it assumed and the date of the prices.
How do I check whether Agile would have saved me money?
Price your own past readings rather than an example home. Our compare-my-usage tool runs a year of your half-hourly data through Agile and Octopus’s other tariffs, standing charges included. Our guide Is Agile Octopus actually cheaper? (/help/is-agile-cheaper) explains which homes tend to come out ahead and why.
How much will I save on an Octopus smart tariff?
Nobody can say without your usage. Price a year of your own half-hourly readings on each tariff with our compare-my-usage tool, which includes standing charges and runs in your browser.
Why does my saving differ from the one on the tariff page?
Usually because your home is not the example home. A different total use, a different share of use in the cheap hours, a different starting tariff or prices from a different month will all change the answer.
Can I test a claim without sharing my data?
Yes. Our usage tools run in your browser and fetch your readings from Octopus directly with your API key. Your key, account number and readings never reach this site.
How much data do I need?
A full year is best, because heating, lighting and charging change with the seasons. A few months gives a rough answer. Gaps in your readings can skew it, so check them first with our data gaps tool.
What about claims for Saving Sessions or battery rewards?
They depend on how often sessions run and how much you can shift, which nobody knows in advance. Octopus measures each session against your own recent use, so treat any annual figure as a rough example.
Tariffs in this guide
Related guides
- SMETS1 vs SMETS2 smart meters: what is the difference?How SMETS1 and SMETS2 smart meters differ, why it matters when you switch supplier, and what it means for Octopus smart tariffs.
- Octopus smart meter not sending readings: what to checkWhy a smart meter stops sending readings to Octopus, how to check it, and how to keep your bills and smart tariff on track while it is fixed.
- What is Octopus Energy? Who runs it, how big it is and what it sellsOctopus Energy explained: who owns and runs it, how it became the UK’s largest supplier, what Kraken is, its main tariffs and how prices vary by region.
- Saving Sessions this winter: how to earn from using lessHow Octopus Saving Sessions Power Downs work this winter: joining Octoplus, how rewards are worked out, and easy ways to cut use at peak times.
- Free electricity from Octopus: how the sessions workHow Octopus’s power-up sessions, Postcode Power Ups and Agile negative prices give you free or cheap electricity, and what you need to join.
- Octopus’s lower standing charge tariffOctopus’s lower standing charge tariff was part of Ofgem’s 2026 pilot and is now full. Who it suited, why most homes pay more on it, and what changes next.
Primary sources
- Next Drive EV tariffs — E.ON Next; checked 2026-11-15. Checked 15 November 2026 (HTTP 200, no redirect): Next Drive and Next Drive Smart have off-peak hours from midnight to 6am, and E.ON Next says the off-peak rate is for the whole home, not just car charging; Next Drive is a one-year fix with no exit fees; both need a smart meter sending half-hourly readings; Next Drive Smart needs an eligible EV and charger, and boost charging or charging outside the smart-charging feature at peak times is billed at the peak rate; its savings figure assumes a set annual mileage charged at the off-peak rate and compares it with charging at the national-average standard variable rate.
- GoElectric EV tariff — EDF; checked 2026-11-15. Checked 15 November 2026 (HTTP 200, no redirect): GoElectric gives a lower rate from 11pm to 6am every night for the home and the car, with fixed prices and an exit fee; it works with any EV and charger, is only for EV drivers who charge at home, is electricity only, and needs a fully connected smart meter; EDF says you should use at least 6% of your energy in the off-peak hours for it to be a good option, and that its EV customers use an average of 43% off-peak; its savings figure compares one usage split (most electricity at peak rates, the rest off-peak) with its standard variable tariff on a standard meter.
- EV Power tariff — British Gas; checked 2026-11-15. Checked 15 November 2026 (HTTP 200, no redirect): EV Power has a cheap rate from midnight to 5am, 35 hours a week, on all usage, not just EV charging; it works with any EV and home charger; the daytime rate is kept close to, but is higher than, British Gas’s normal rates; you need an EV you charge at home, a smart electricity meter and Direct Debit; it does not work with Economy 7 storage heaters; its quote estimate assumes 46% of your electricity is used off-peak when it does not know your history.
- Charge Anytime — OVO; checked 2026-11-15. Checked 15 November 2026 (HTTP 200, no redirect): Charge Anytime is an add-on to an OVO tariff, not a whole-home time-of-use tariff; all the electricity your home and car use is first charged at your standard home rate, then at the end of each month OVO works out the energy used for smart charging and credits it the following month; there are monthly plans with a home-charging mileage allowance or pay as you go; you need a compatible EV or charger, a smart meter and an OVO account; urgent or boost charging is at your standard home rate; its savings figure assumes a set annual mileage and compares it with charging at OVO’s average standard variable rate plus public charging at an assumed rate.
- Agile Octopus — Octopus Energy; checked 2026-11-15. Checked 15 November 2026 (HTTP 200): Agile Octopus includes Price Cap Protect, a guaranteed maximum unit rate per kWh that the half-hourly price never goes above, set far above Ofgem’s price cap unit rate. Half-hourly prices tied to wholesale prices and updated daily for the next 24 hours, set between 4pm and 8pm (usually nearer 4pm); Price Cap Protect ceiling; Plunge Pricing pays you when prices drop below zero; SMETS2 or some SMETS1 smart meter needed, around 14 days to connect.
- Octopus Tracker — Octopus Energy; checked 2026-11-14. Prices updated every day from an independently published wholesale price; electricity, gas or both; Price Cap Protect ceiling on the daily price; SMETS2 or some SMETS1 smart meter needed; you must already be an Octopus customer, joining Flexible Octopus first if not.
- Saving Sessions FAQs — Octopus Energy; checked 2026-11-15. Checked 15 November 2026 (HTTP 200, no redirect): Octopus works out your usual use for a session from your half-hourly readings over the last 10 weekdays (leaving out session days and bank holidays) for a weekday session, or the last 4 weekend days for a weekend or bank holiday session, and rewards each kWh saved against that benchmark (or used above it, for a Power Up); with solar or a battery, export counts as part of your usual use and the reward is based on the net change across import and export; in a Power Up the reward is your import minus your export, paid at your import unit rate, so while your import rate is above your export rate it pays to use or store the energy rather than export it, for example by charging a home battery and exporting later; an Intelligent EV or battery that smart-charges during a Power Up counts towards the reward.